Time and date
CONSTRUCTION DIRECTORY
Energy Savings NI - Heating Recovery suppliers
High-comfort, low-energy ventilation
An energy efficient, fresh, clean and healthy climate - all year round
Ubbink Heat Recovery Ventilation (HRV) systems provide constant, controlled ventilation to homes without creating cold draughts or increasing the heat loss normally caused by ventilation. By using a Ubbink HRV system the calculated heat loss is actually reduced, making homes much more energy efficient.
Stale air - polluted with smells, CO2 and humidity will be constantly extracted via ducted air valves in the kitchen, utility, bathrooms and cloakrooms and passed through a counter current heat exchanger before being evacuated to the outside as cold air.
Fresh air - ducted from outside via a G6 pollen filter, is warmed by the high efficiency heat exchanger and then delivered through air valves into living rooms and bedrooms.
All appliances are tested and listed to SAP Appendix Q.
A COMPACT APPLIANCE IN 3 VERSIONS
The appliance comes in three versions and three capacities at 150Pa:
Ubbink HRV M300 and G400 are available in two versions - with four air connections at the top (4b) as standard or with two connections at the top and two at the bottom (2b/2o) to special order. Ubbink HRV C180 is only available with four air connections at the top (4b). The air output spigots to the atmosphere and the air input from the atmosphere are always at the top. All air connections come with a groove for sealing rings. Dependent on the air flow rate, Ubbink HRV C180 is suitable for connecting ducts of Ø125mm, M300 for ducts of Ø150 or Ø160mm (from approx. 260m3/h) and G400 for ducts of Ø180mm.
CONSTANT FLOW FANS
At the chosen ventilation setting, the constant flow fans keep the air flow rate constant under all conditions. This results in a permanently high efficiency while reducing initial adjustments to the minimum. The air flow rate is not influenced by filter fouling either.
FROST PROTECTION
The frost protection system provides optimum protection from freezing which preserves the high efficiency of the system at extreme temperatures.
An energy efficient, fresh, clean and healthy climate - all year round
Ubbink Heat Recovery Ventilation (HRV) systems provide constant, controlled ventilation to homes without creating cold draughts or increasing the heat loss normally caused by ventilation. By using a Ubbink HRV system the calculated heat loss is actually reduced, making homes much more energy efficient.
Stale air - polluted with smells, CO2 and humidity will be constantly extracted via ducted air valves in the kitchen, utility, bathrooms and cloakrooms and passed through a counter current heat exchanger before being evacuated to the outside as cold air.
Fresh air - ducted from outside via a G6 pollen filter, is warmed by the high efficiency heat exchanger and then delivered through air valves into living rooms and bedrooms.
All appliances are tested and listed to SAP Appendix Q.
A COMPACT APPLIANCE IN 3 VERSIONS
The appliance comes in three versions and three capacities at 150Pa:
- Ubbink HRV Compact C180 - capacity of 180m3/h;
- Ubbink HRV Medio M300 - capacity of 300m3/h;
- Ubbink HRV Grande G400 - capacity of 400m3/h.
Ubbink HRV M300 and G400 are available in two versions - with four air connections at the top (4b) as standard or with two connections at the top and two at the bottom (2b/2o) to special order. Ubbink HRV C180 is only available with four air connections at the top (4b). The air output spigots to the atmosphere and the air input from the atmosphere are always at the top. All air connections come with a groove for sealing rings. Dependent on the air flow rate, Ubbink HRV C180 is suitable for connecting ducts of Ø125mm, M300 for ducts of Ø150 or Ø160mm (from approx. 260m3/h) and G400 for ducts of Ø180mm.
CONSTANT FLOW FANS
At the chosen ventilation setting, the constant flow fans keep the air flow rate constant under all conditions. This results in a permanently high efficiency while reducing initial adjustments to the minimum. The air flow rate is not influenced by filter fouling either.
FROST PROTECTION
The frost protection system provides optimum protection from freezing which preserves the high efficiency of the system at extreme temperatures.
![PEFC [Ireland] Ltd](http://www.construction.co.uk/advnew/588433bul.jpg)
